Not able to add external display with USB 3 to VGA FL2000 chipset in Ubuntu 20.04
By Jessica Wood •
What am I trying?
Trying to add external display using USB 3 to VGA Fresco Logic 2000 chipset adaptor by compiling a driver and loading a module in the kernel 5.4.0-84-generic in Ubuntu 20.04.3 LTS.
Problem I am facing.
As soon as I load the modules, the screen flickers, and lsmod shows used_by 1 but there's no display on the target device and the used by in fl2000 goes back to 0.
Driver Link:
lsusb
Bus 002 Device 004: ID 1d5c:2000 Fresco Logic FL2000/FL2000DX VGA/DVI/HDMI Adapter
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 13d3:5a07 IMC Networks USB2.0 VGA UVC WebCam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod
Module Size Used by
fl2000 32768 0Kernel Logs
[ 1301.640870] br-f29d10b4f721: port 1(veth7a45700) entered disabled state
[ 1330.244677] INFO: task kworker/7:3:351 blocked for more than 845 seconds.
[ 1330.244684] Tainted: G W OE 5.4.0-84-generic #94-Ubuntu
[ 1330.244687] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1330.244690] kworker/7:3 D 0 351 2 0x80004000
[ 1330.244703] Workqueue: usb_hub_wq hub_event
[ 1330.244706] Call Trace:
[ 1330.244717] __schedule+0x2e3/0x740
[ 1330.244723] schedule+0x42/0xb0
[ 1330.244728] schedule_timeout+0x10e/0x160
[ 1330.244734] ? kobj_kset_leave+0x51/0x60
[ 1330.244738] ? __kobject_del+0x41/0x50
[ 1330.244743] wait_for_completion+0xb1/0x120
[ 1330.244748] ? wake_up_q+0x70/0x70
[ 1330.244756] i2c_del_adapter+0x240/0x300
[ 1330.244768] fl2000_i2c_adapter_release+0x22/0x26 [fl2000]
[ 1330.244774] release_nodes+0x19a/0x1e0
[ 1330.244779] devres_release_all+0x3f/0x50
[ 1330.244784] device_release_driver_internal+0x10f/0x1d0
[ 1330.244787] device_release_driver+0x12/0x20
[ 1330.244790] bus_remove_device+0xe1/0x150
[ 1330.244795] device_del+0x165/0x370
[ 1330.244799] usb_disconnect+0x16e/0x270
[ 1330.244803] hub_port_connect+0x7d/0x850
[ 1330.244808] ? usb_set_device_state+0x9b/0x170
[ 1330.244812] port_event+0x502/0x780
[ 1330.244816] ? __switch_to_asm+0x34/0x70
[ 1330.244820] hub_event+0x152/0x390
[ 1330.244825] ? psi_avgs_work+0x64/0xd0
[ 1330.244831] process_one_work+0x1eb/0x3b0
[ 1330.244836] worker_thread+0x4d/0x400
[ 1330.244841] kthread+0x104/0x140
[ 1330.244846] ? process_one_work+0x3b0/0x3b0
[ 1330.244849] ? kthread_park+0x90/0x90
[ 1330.244853] ret_from_fork+0x35/0x40
[ 1361.329676] br-f29d10b4f721: port 1(veth6683171) entered blocking state
[ 1361.329682] br-f29d10b4f721: port 1(veth6683171) entered disabled state
[ 1361.329973] device veth6683171 entered promiscuous mode
[ 1361.330384] br-f29d10b4f721: port 1(veth6683171) entered blocking state
[ 1361.330389] br-f29d10b4f721: port 1(veth6683171) entered forwarding state
[ 1361.331506] br-f29d10b4f721: port 1(veth6683171) entered disabled state
[ 1361.823778] eth0: renamed from veth4e9e9b8
[ 1361.852224] IPv6: ADDRCONF(NETDEV_CHANGE): veth6683171: link becomes ready
[ 1361.852402] br-f29d10b4f721: port 1(veth6683171) entered blocking state
[ 1361.852407] br-f29d10b4f721: port 1(veth6683171) entered forwarding state
[ 1363.235808] br-f29d10b4f721: port 1(veth6683171) entered disabled state
[ 1363.236620] veth4e9e9b8: renamed from eth0
[ 1363.510263] br-f29d10b4f721: port 1(veth6683171) entered disabled state
[ 1363.515881] device veth6683171 left promiscuous modeKnow someone who can answer? Share a link to this question via email, Twitter, or Facebook.
More in general
"Zoraya ter Beek, age 29, just died by assisted suicide in the Netherlands. She was physically healthy, but psychologically depressed. It's an abomination that an entire society would actively facilitate, even encourage, someone ending their own life because they had no hope. Th…"
