USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800
Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick.
When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.02 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
pm_op(): usb_dev_suspend+0x0/0x20 returns -2
PM: Device usb8 failed to suspend async: error -2
PM: Some devices failed to suspend
PM: resume of devices complete after 0.430 msecs
PM: resume devices took 0.000 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
PM: Syncing filesystems ...I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root huband lspci shows the physical devices are:
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)Booting with no_console_suspend makes no difference.
2 Answers
Do you have a USB3-compatible motherboard?
If so, check this: Computer won't sleep
I had the same problem (although my device ID was 'usb12', the message was otherwise identical). The fix detailed in the above link worked like a charm and fixed the issue for me.
1Try different kernels from kernel PPA, you may be lucky. Try 2.6.32, 2.6.35, 2.6.36 final versions (without rc), and 2.6.37.rc1 too.
Install only linux-image-x.x.x-generic_...(i386 or amd64).deb
More in general
"Zoraya ter Beek, age 29, just died by assisted suicide in the Netherlands. She was physically healthy, but psychologically depressed. It's an abomination that an entire society would actively facilitate, even encourage, someone ending their own life because they had no hope. Th…"
